Cisco Cisco 2106 Wireless LAN Controller Notas de publicación

Cisco controllers support standard SNMP Management Information Base (MIB) files. MIBs can be 
downloaded from the Software Center on Cisco.com. Only one MIB is posted per major release (6.0, 5.2, 
5.1, and so on). If an updated MIB becomes available, the previous version is removed from the Software 
Center and replaced by the new version.

This maintenance release does not introduce new features.

Software is factory installed on your controller and automatically downloaded to the access points after 
a release upgrade and whenever an access point joins a controller. As new releases become available for 
the controllers and their access points, consider upgrading.

The Cisco WiSM requires software release SWISMK9-32 or later releases. The Supervisor 720 
12.2(18)SXF2 supports the Cisco WiSM software release 3.2.78.4 or later releases, and the Supervisor 
720 12.2(18)SXF5 (Cisco IOS Software Modularity) supports the Cisco WiSM software release 
4.0.155.5 (with Cisco IOS Software Modularity).

To use the Cisco WiSM in the Cisco 7609 and 7613 Series Routers, the routers must be running Cisco 
IOS Release 12.2(18)SXF5 or later releases.

The Cisco Wireless LAN Controller Network Module is supported on Cisco 28/37/38xx Series 
Integrated Services Routers running Cisco IOS Release 12.4(11)T2, 12.4(11)T3, and 12.5.

To use the controller in the Catalyst 3750G Wireless LAN Controller Switch, the switch must be running 
Cisco IOS Release 12.2(25)FZ, 12.2(35)SE or later releases, 12.2(37)SE or later releases, 12.2(44)SE or 
later releases, or 12.2(46)SE or later releases. The following Cisco IOS Releases and any variants are 
not supported: 12.2(25)SEC, 12.2(25)SED, 12.2(25)SEE, 12.2(25)SEF, and 12.2(25)SEG. All Catalyst 
3750 software feature sets (IP Base, IP Service, and Advanced IP Services) are supported for use with 
the controller.

You can use the 2112 and 2125 controllers only with software release 5.1.151.0 or later releases.