Cisco Cisco Catalyst 6500 Series 7600 Series Wireless Services Module (WiSM) Guía Para Resolver Problemas
Lightweight Access Points (LAPs). This example uses 1231 series LAP.
•
Switch with DHCP
•
Microsoft 2003 server configured as a Domain Controller installed with Microsoft Certificate
Authority and with Microsoft Internet Authentication Service (IAS).
Authority and with Microsoft Internet Authentication Service (IAS).
•
Microsoft Domain Security
•
Cisco 802.11 a/b/g Wireless Client Adapter with ADU version 3.6 configured with WPA2/ PEAP
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
IPSec RADIUS Configuration
This configuration guide does not address the installation or configuration of Microsoft WinServer, Certificate
Authority, Active Directory or WLAN 802.1x client. These components must be installed and configured
prior to the deployment of the Controller IPSec RADIUS feature. The remainder of this guide documents how
to configure IPSec RADIUS on these components:
Authority, Active Directory or WLAN 802.1x client. These components must be installed and configured
prior to the deployment of the Controller IPSec RADIUS feature. The remainder of this guide documents how
to configure IPSec RADIUS on these components:
Cisco WLAN Controllers
1.
Windows 2003 IAS
2.
Microsoft Windows Domain Security Settings
3.
Configure the WLC
This section explains how to configure IPSec on the WLC through the GUI.
From the Controller GUI, complete these steps.
Navigate to the Security > AAA > RADIUS Authentication tab in the Controller GUI, and add a
new RADIUS server.
new RADIUS server.
1.
Configure the IP address, Port 1812, and a shared secret of the new RADIUS server. Check the IPSec
Enable− check box, configure these IPSec parameters, and then click Apply.
Enable− check box, configure these IPSec parameters, and then click Apply.
2.