Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Diseño
OL-4556-01
28
ONS 15454 Common Control Cards
Table 1-2 lists the six common control cards available for the Cisco ONS 15454 and summarizes
their functions.
Table 1-2: List of ONS 15454 Common Control Cards
Card Function
Page
TCC+
The enhanced Timing Control Card (TCC+) is required for
System Releases from R2.2.2 to R4.0. The TCC+ performs
system initialization, provisioning, alarm reporting, maintenance,
diagnostics, IP address detection/resolution, SONET Data
Communications Channel (DCC) termination, and system fault
detection for the ONS 15454.
System Releases from R2.2.2 to R4.0. The TCC+ performs
system initialization, provisioning, alarm reporting, maintenance,
diagnostics, IP address detection/resolution, SONET Data
Communications Channel (DCC) termination, and system fault
detection for the ONS 15454.
193
TCC2
The new TCC2 is Cisco’s next generation Timing Control Card
that performs the same functions as the TCC+. The TCC2 is the
standard processor card shipped with System Releases 4.0 and
higher.
that performs the same functions as the TCC+. The TCC2 is the
standard processor card shipped with System Releases 4.0 and
higher.
193
XC-VT
The XC-VT establishes STS-1 and VT 1.5 connections and
performs SONET TDM switching at the STS-1 level.
performs SONET TDM switching at the STS-1 level.
193
XC-10G
The XC-10G provides the same features as the XC-VT, but has
four times the bandwidth. The XC-10G is required with the OC-
192 OC-48 any-slot, and ML-series Ethernet cards.
four times the bandwidth. The XC-10G is required with the OC-
192 OC-48 any-slot, and ML-series Ethernet cards.
193
AIC
The Alarm Interface Controller (AIC) card provides
environmental alarm inputs and output controls, orderwire, and
user data channel capabilities and is not required for system
operation for System Releases 3.3 and lower.
environmental alarm inputs and output controls, orderwire, and
user data channel capabilities and is not required for system
operation for System Releases 3.3 and lower.
193
AIC-I
The optional Alarm Interface Controller card (AIC-I) replaces the
AIC card for System Releases 3.4 and higher. It provides four
main capabilities including 1) environmental alarm
interconnection, 2) orderwire, 3) A- and B-side input voltage
monitoring, 4) access to user data channels.
AIC card for System Releases 3.4 and higher. It provides four
main capabilities including 1) environmental alarm
interconnection, 2) orderwire, 3) A- and B-side input voltage
monitoring, 4) access to user data channels.
193
ONS 15454 Interfaces
The ONS 15454 is architected for maximum flexibility. A single ONS 15454 shelf assembly
supports a variety of card configurations and interfaces ranging from 1.5Mb/s to 10Gb/s as listed
below in Table 1-3.