Cisco Cisco NSS322 2-Bay Smart Storage Referencia técnica
How to Use RADIUS on Cisco Smart Storage
© 2010 Cisco Systems, Inc. All rights reserved.
Page 11 of 14
S et Up an Acc es s Device with R ADIUS Authentication
Any device that has the built-in 802.1x feature can be configured for network access security by
using the RADIUS server for authorization. Following are four authentication methods and the
steps needed to configure an access device such as a network camera or PC: (1) EAP-MD5,
(2) EAP-PEAP, (3) EAP-TLS, (4) EAP-TTLS.
To Configure EAP-MD5 Authentication
1. Open a GUI browser and log in to the device.
2. Choose Network Setting > 802.1x from the Navigation menu.
3. Check the Enable 802.1x check box.
4. In EAP Type, select EAP-MD5 from the drop-down list.
5. In Identity, enter the RADIUS user account username.
6. In Password, enter the RADIUS user account password.
7. Click Save.
Note: The user account information (Identity and Password) entered into the EAP-MD5 must be an
existing account already created on the RADIUS server (Smart Storage) database. If the account is
existing on the RADIUS server, the device will be successfully authenticated and allow access to
the network via a port on the switch that is configured for RADIUS security settings.
To Configure EAP-PEAP Authentication
1. Open a GUI browser and log in to the device.
2. Choose Network Setting > 802.1x from the Navigation menu.
3. Check the Enable 802.1x check box.
4. In EAP Type, select EAP-PEAP from the drop-down list.
5. In Identity, enter the RADIUS user account username.
6. In Password, enter the RADIUS user account password.
7. Select the Inner Authentication Method from the drop-down list.
8. Click Browse to locate a certificate file to upload to the access device.