Cisco Cisco UCS C3260 Rack Server Hoja De Datos
Cisco UCS C260 M2 High-Performance Rack-Mount Server
6
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
are provided in
.
Table 1 Capabilities and Features
Capability/Feature
Description
Chassis
Two rack unit (2RU) chassis
CPU
Two Intel® Xeon® E7-2800 series processors
Chipset
Intel® 7500 (Boxboro) chipset
Memory
Sixteen slots for memory riser boards. The memory riser boards come in two
choices:
■
Standard Intel chipset memory riser boards: each of these 16 risers can
hold two DIMMs. This provides a possible total of up to 32 DIMMs and 512
GB of industry-standard DDR3 memory.
■
Optional memory riser boards containing a memory-expansion ASIC:
each of the 16 risers can hold 4 DIMMs. This provides a possible total of
up to 64 DIMMs and 1024 GB of industry-standard DDR3 memory.
Cisco FlexFlash drives
The server includes one internal Cisco FlexFlash drive, which is included on
the I/O riser card.
This drive is pre-loaded with four virtual drives (implemented as flash
This drive is pre-loaded with four virtual drives (implemented as flash
memory). The four virtual drives contain, respectively, the Cisco Server
Configuration Utility, the Cisco Host Upgrade Utility, the Cisco C-Series
server drivers set, and a Hypervisor. These virtual drives are booted through
the server’s F6 boot menu.
USB Flash drive
An optional 4GB USB drive can be used as a bootable drive
Expansion slots
There are seven PCIe expansion slots:
■
Two standard-profile, half-length, x16 horizontal slots on riser cards
■
Four low-profile, half-length, x8 slots on motherboard
■
One low-profile, half-length, x4 slot (x8-length connector) on
motherboard
■
All cards are half-length due to internal clearance.
Storage controller
Factory-configured RAID support options:
■
RAID 0, 1, 5, 6, 10, 50, or 60 support for up to 16 SAS or SATA drives, with
the optional LSI MegaRAID SAS 9261-8i RAID controller (up to two).
There are also two mounting points inside the chassis for the optional LSI
RAID battery backup units that can be used with the controller cards.
RAID battery backup units that can be used with the controller cards.