Cisco Cisco MDS 9000 NX-OS Software Release 5.2 Notas de publicación
57
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(6)
OL-27554-01
Caveats
Note
You can use multiple device-alias commands of the same type such as delete, rename, and add in the
same batch if the names of all the device-alias that areaffected are unique.
same batch if the names of all the device-alias that areaffected are unique.
•
CSCub51064
Symptom: An ISSU from Cisco MDS Release 4.2(7dE5) to Release 5.2(6) fails when the number
of IOA tape acceleration flows exceeds 511.
of IOA tape acceleration flows exceeds 511.
This issue might be seen on an Cisco MDS 9000 Series switch with the MDS 9000 18/4-port
Multiservice (MSM-18/4) module.
Multiservice (MSM-18/4) module.
Workaround: None.
•
CSCuc35483
Symptom: Activation of a zone set in a VSAN in interop mode 1, fails with the following error
messages:
messages:
%ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN_DOM: %$VSAN <vsan>%$ Activation failed
: reason Invalid zonset format domain <dom>
%ZONE-2-ZS_CHANGE_SFC_FAILED: %$VSAN <vsan>%$ SFC failed : domain <dom> returns
INVALID_ZSET_FORMAT
The failure occurs only if the following conditions exist:
–
Zone set activation occurs from a Cisco MDS 9000 switch.
–
The switch is running Cisco NX-OS Release 5.2(6) or Release 5.2(6a).
–
The VSAN in question is running in interop mode 1.
–
McData switches are present in the VSAN that is in interop mode 1.
Workaround:
There are two methods for working around this issue:
–
Leave the VSAN in interop mode 1 and do all zoning from the McData side. This method is
completely nondisruptive.
completely nondisruptive.
–
Convert VSAN to interop 4. This method is disruptive to the entire VSAN becuase it needs to
be suspended and the fcdomain domains need to be adjusted to be in the range of 1 to 31.
be suspended and the fcdomain domains need to be adjusted to be in the range of 1 to 31.
•
CSCuc84790
Symptom: Following an upgrade to NX-OS Release 5.2(6) or Release 5.2(6a), FCIP interfaces are
down and the following message appears:
down and the following message appears:
fcip1 is down (Tunnel port src interface unbound)
The licenses for all SAN_EXTN_OVER_IP packages in the grace period might be unnecessarily
checked out.The inter-VSAN routing (IVR) process is using those licenses.
checked out.The inter-VSAN routing (IVR) process is using those licenses.
switch# show ivr
License status
-----------------
IVR is running based on the following license(s)
SAN_EXTN_OVER_IP
SAN_EXTN_OVER_IP_IPS2
SAN_EXTN_OVER_IP_IPS4
SAN_EXTN_OVER_IP_9216i
SAN_EXTN_OVER_IP_18_4
SAN_EXTN_OVER_IP_SSN16