Cisco Cisco MDS 9000 NX-OS Software Release 5.2 Notas de publicación

Workaround: None

CSCuu76450

Symptom: MDS fabric switch running in NPV mode fails to generate port-monitor alerts.

Conditions: Applies to all MDS fabric switches running in NPV mode using port-monitor.

Applies to all versions prior to NX-OS 6.2(13).

Will occur only in the following conditions:

- After one or more upstream NP or TNP ports goes down and then back up. 

- For each (T)NP port that flaps, one F port at the end of the range of ports

will no longer be scanned for port-monitor counter events. For example, if the

(T)NP port fc1/1 flaps then the last F port being used(ex. fc1/48) will no 

longer be scanned for port-monitor counter events.

The documentation set for NX-OS for the Cisco MDS 9000 Family includes the following documents. 
To find a document online, access the following web site:

The documentation set for Cisco Fabric Manager appears in the Cisco Fabric Manager Release Notes 
for Release 4.2(1), which is available from the following website:

Cisco MDS 9000 Family Switch-to-Switch Interoperability Configuration Guide