Cisco Cisco NSS324R 4-Bay Rackmount Smart Storage Notas de publicación
4
Release Notes for Cisco Smart Storage phpBB PKG Package Version 3.0.7
Release Notes
Downloading and Upgrading the Firmware
This procedure describes how to upgrade the firmware on the NSS 300 Series
Smart Storage devices from the Network Attached Storage (NAS) interface.
Smart Storage devices from the Network Attached Storage (NAS) interface.
!
CAUTION
As a precautionary measure, back up the NAS system configuration before
upgrading the firmware.
upgrading the firmware.
!
CAUTION
Do not upgrade the firmware over a WAN or Wi-Fi link since an interuption in service
can lead to corruption of the firmware upgrade process.
can lead to corruption of the firmware upgrade process.
From the Administration > Firmware Upgrade window, you can view the current
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
To upgrade the firmware:
STEP 1
Click Administration > Firmware Upgrade from the Navigation menu. The
Firmware Upgrade window appears. The current firmware version is displayed.
Firmware Upgrade window appears. The current firmware version is displayed.
STEP 2
Click Browse to locate the correct firmware file for the system update. Before
updating the system, verify that the product model and firmware version you are
going to update is correct.
updating the system, verify that the product model and firmware version you are
going to update is correct.
STEP 3
Click Update The System.
Within 15 seconds, a MD5 checksum result window will display to confirm the
integrity of the system. After the successful integrity check of the NAS, click OK
for the new firmware file to upload to the NAS. After this has completed, a
message displays and asks you to reboot the system. Please wait patiently. A
system log in window will automatically display after the successful update to the
new firmware.
integrity of the system. After the successful integrity check of the NAS, click OK
for the new firmware file to upload to the NAS. After this has completed, a
message displays and asks you to reboot the system. Please wait patiently. A
system log in window will automatically display after the successful update to the
new firmware.