Cisco Cisco Email Security Appliance C650 Guía De Instalación
14
Command-Line Interface
Step 1
For command-line interface access via the console port
(see the
(see the
access the command-line interface terminal emulator
using 9600 bits, 8 bits, no parity, 1 stop bit (9600, 8,
N, 1) and flow control set to Hardware.
using 9600 bits, 8 bits, no parity, 1 stop bit (9600, 8,
N, 1) and flow control set to Hardware.
Step 2
Initiate a telnet or SSH session to the IP address
192.168.42.42.
192.168.42.42.
Step 3
Log in as admin with the password ironport.
Step 4
At the prompt, run the systemsetup command.
11
Run the System Setup Wizard
The System Setup Wizard starts automatically when you access
the appliance via the web-based interface (or when you run the
systemsetup command from the command-line interface) and
displays the end user license agreement (also known as EULA).
the appliance via the web-based interface (or when you run the
systemsetup command from the command-line interface) and
displays the end user license agreement (also known as EULA).
Step 1
Start the System Setup Wizard.
Step 2
Accept the end user license agreement.
Step 3
Enter registration information.
Step 4
Enter information from the
Step 5
Set anti-spam and anti-virus security settings.
Step 6
Review the configuration summary page.
Step 7
Log back in to the appliance with the username admin
and the new password that you set in the System Setup
Wizard.
and the new password that you set in the System Setup
Wizard.
The Cisco C380 and Cisco C680 Email Security
Appliance uses a self-signed certificate that may trigger
a warning from your web browser. You can simply
accept the certificate and ignore this warning.
Appliance uses a self-signed certificate that may trigger
a warning from your web browser. You can simply
accept the certificate and ignore this warning.