Cisco Cisco Video Surveillance 4000 IP Camera Notas de publicación

In the Firmware window, click the Upgrade button.

The Upgrade Firmware window appears.

In the Upgrade Firmware window, click the Browse button, choose the upgrade file, and then click 
Open.

The upgrade file may be stored on another PC.

Click Upgrade.

Do not power down the IP camera during the upgrade procedure.

After you upgrade the firmware, the IP camera automatically restarts. It retains all configuration 
information.

Perform the following procedure to upgrade your IP camera to Release 3.1.1 only if the IP camera part 
number is 74-9126-02 or 74-9125-02-02 and the firmware release on the IP camera is 3.1.0. Otherwise, 
use the procedure in the 

.

You can find the IP camera part number listed on the camera user interface Home window, under the 
General Information area.

Take these actions to obtain the upgrade hot fix utility:

Go to this URL: 

Locate and choose the upgrade hot fix utility file, which is named 
4xxxE-HotFixUtilityInstallerV3.1.1.msi, and click Download.

Log in and follow the on-screen prompts to download the upgrade hot fix utility file to your PC.

Close Internet Explorer.

Double-click the 4xxxE-HotFixUtilityInstallerV3.1.1.msi file that you downloaded in Step 3 and 
follow the on-screen prompts to install the utility on your PC.

During the installation process, the installer adds the Hot Fix Utility icon to your desktop.

Double-click the Hot Fix Utility icon to open the utility. 

Take these actions to upgrade a single IP camera:

Click Single Camera.

Enter the IP address, admin password, and SSH password for the IP camera to be upgraded.

Click Upgrade.

Do not power down the IP camera during the upgrade procedure.