Cisco Cisco ONS 15310-CL SONET Multiservice Platform Guía De Instalación
20
Upgrading the Cisco ONS 15310-CL to Release 9.2.1.3
OL-26738-01
Related Documentation
Note
Note You might have to log in (
) to each node again to activate the software
(
).
Step 14
After all nodes have been activated, log in using CTC or Telnet (
) and verify there are
no outstanding alarms.
Step 15
Remove all BLSR lockouts using the following TL1 command:
RLS-PROTNSW-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::<DIRECTION>];
where:
•
<TID> is the target identifier (optional).
•
<AID> indicates the entity in the node and must not be null.
•
<CTAG> is the correlation tag that correlates command and response messages (optional).
•
<DIRN> is the direction of transmission (transmit or receive). The possible values are
RCV—receive direction only (default), TRMT—transmit direction only, or BTH—both transmit
and receive directions.
RCV—receive direction only (default), TRMT—transmit direction only, or BTH—both transmit
and receive directions.
For example:
RLS-PROTNSW-OC48:PETALUMA:FAC-6-1:209::BTH;
Stop. You have completed this procedure.
Related Documentation
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration
Guide
Guide
•
Cisco ONS SONET TL1 Command Guide
•
Cisco ONS SONET TL1 Reference Guide
•
Release Notes for Cisco ONS 15310-CL Release 9.2.1.x
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that
pertains to all of Cisco, refer to the
pertains to all of Cisco, refer to the
section.