Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Notas de publicación
31
Release Notes for Cisco ONS 15454 SDH Release 7.0.7
OL-15327-01
Resolved Caveats for Release 7.0.x
Resolved Caveats for Release 7.0.x
This section highlights resolved caveats for Release 7.0.x.
Maintenance and Administration
CSCsl04416
When a node is upgraded from 4.14 release to 7.05 release, the Back Plane (BP) LAN connection goes
to down state. If slot 7 has the active TCC on the 4.14 release and we try to activate to 7.05 release, there
is a high probability that the BP LAN stays in down state.
to down state. If slot 7 has the active TCC on the 4.14 release and we try to activate to 7.05 release, there
is a high probability that the BP LAN stays in down state.
The workaround is to make TCC in slot 11 active, before the activation to 7.05 release.
The problem is solved by protecting the critical area of the LAN port during the activation process. This
issue is resolved in release 7.0.7.
issue is resolved in release 7.0.7.
Note
If the upgrade from release 4.14 to 7.05 causes the Back Plane LAN to go down, the only way
to bring it back up is to:
1. Reset the active TCC
2. Issue the vxWork command to re-enable the BP LAN
to bring it back up is to:
1. Reset the active TCC
2. Issue the vxWork command to re-enable the BP LAN
CSCsg17018
The Inhibit FE loopback parameter for the mentioned cards should be set to true. (The check box should
be checked.) Before you test this, a) Please delete the database. (FlmDeleteDb) b) And reboot the node.
(Reboot)
be checked.) Before you test this, a) Please delete the database. (FlmDeleteDb) b) And reboot the node.
(Reboot)
You can check the parameter as mentioned below.
•
Card View
•
Maintenance Pane
•
Loopback Pane
•
Port pane on the card for which this is supported. (Mentioned in the bracket)
For 7.04 310MA
•
DS1_28_DS3_EC1_3_LINE_CARD (DS3 Port)
•
DS1_84_DS3_EC1_3_LINE_CARD (DS3 Port)
15454