Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
2
Cisco ONS 15454, ONS 15310-CL, ONS 15310-MA, ONS 15600
This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions
and input and output formats supported by the Cisco ONS 15454, Cisco ONS 15310-CL, Cisco
ONS 15310-MA, and Cisco ONS 15600. Refer to the Cisco ONS SONET TL1 Command Guide for
a complete description of TL1 commands.
This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions
and input and output formats supported by the Cisco ONS 15454, Cisco ONS 15310-CL, Cisco
ONS 15310-MA, and Cisco ONS 15600. Refer to the Cisco ONS SONET TL1 Command Guide for
a complete description of TL1 commands.
TL1 commands conform to the following syntax:
a:b:c:d:e: ...z;
where:
“a” is the Command Code
“b” is the Target Identifier (TID)
“c” is the Access Identifier (AID) or the User Identifier (UID)
“d” is the Correlation Tag (CTAG)
“e: ...z;” are other positions required for various commands
The TID, AID, and CTAG route and control the TL1 command.
Other parameters provide additional information required to complete the action requested by the
command.
a:b:c:d:e: ...z;
where:
“a” is the Command Code
“b” is the Target Identifier (TID)
“c” is the Access Identifier (AID) or the User Identifier (UID)
“d” is the Correlation Tag (CTAG)
“e: ...z;” are other positions required for various commands
The TID, AID, and CTAG route and control the TL1 command.
Other parameters provide additional information required to complete the action requested by the
command.
1
BLSR
Table 1
BLSR
DLT-<MOD_RING>:[<TID>]:<AID>:<CTAG>[:::];
Deletes the BLSR of the Network Element (NE).
ED-<MOD_RING>:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>],[NODEID=<NODEID>],
[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>][:];
[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>][:];
Edits the BLSR attributes.
ENT-<MOD_RING>:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>],NODEID=<NODEID>,
MODE=<MODE>,[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],
[SRVTM=<SRVTM>],EASTWORK=<EASTWORK>,WESTWORK=<WESTWORK>,[EASTPROT=
<EASTPROT>],[WESTPROT=<WESTPROT>];
MODE=<MODE>,[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],
[SRVTM=<SRVTM>],EASTWORK=<EASTWORK>,WESTWORK=<WESTWORK>,[EASTPROT=
<EASTPROT>],[WESTPROT=<WESTPROT>];
Creates a two-fiber or four-fiber BLSR (four-fiber BLSR is supported on the ONS 15454 and the
ONS 15600 only).
ONS 15600 only).
EX-SW-<OCN_BLSR>:[<TID>]:<AID>:<CTAG>::,[<SWITCHTYPE>][,<DIRECTION>];
Exercises the algorithm for switching from a working facility to a protection facility without actually
performing a switch.
performing a switch.