Cisco Cisco NSS324R 4-Bay Rackmount Smart Storage Libro blanco
20
Security Considerations White Paper for Cisco Smart Storage
White Paper
Enable Network Access Protection
To enable network access protection:
STEP 1
Log in to the NAS by opening a web browser and entering the IP address of the
NAS device. It is important to include the port 8080 following the IP address.
For example:
For example:
http://<NAS IP address>:8080
STEP 2
Choose
Administration > Security
from the Navigation menu. The
Security
window opens.
STEP 3
Select the
NETWORK ACCESS PROTECTION
tab.
STEP 4
Check the
Enable Access Protection
check box.
STEP 5
Check the desired Network Protocols and select the desired access protection
parameters. For example, allowable unsuccessful attempts and blocked duration
(5 minutes, 30 minutes, 1 hour, 1 day, or forever).
STEP 6
Click
APPLY
.
Figure16 Network Access Protection Configuration