Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Notas de publicación
40
Release Notes for Cisco ONS 15454 SDH Release 5.0.4
OL-8075-01
New Features and Functionality
DDTS # CSCec75857
There is no SNMP return value for dsx1TotalTable when you configure an ONS 15454 with DSX 1 day
stats, then query the node. This issue is resolved in Release 5.0.
stats, then query the node. This issue is resolved in Release 5.0.
TL1
DDTS # CSCeg87471
Do not set the TID for an ENE to more than 19 characters. Setting the TID for an ENE to 20 characters
or more and then issuing a TL1 command on the GNE to execute on the ENE will result in TL1 agent
connectivity issues on the ENE. Specifically, if you set the TID on the ENE to 20 characters, reboot the
TCC, then try to connect to that ENE from a GNE this will result in a loss of TL1 connectivity to the
GNE. This issue is resolved in Release 5.0.2.
or more and then issuing a TL1 command on the GNE to execute on the ENE will result in TL1 agent
connectivity issues on the ENE. Specifically, if you set the TID on the ENE to 20 characters, reboot the
TCC, then try to connect to that ENE from a GNE this will result in a loss of TL1 connectivity to the
GNE. This issue is resolved in Release 5.0.2.
New Features and Functionality
This section highlights new features and functionality for Releases 5.0.x. (Release 4.7 features are also
included for ease of access.) For detailed documentation of each of these features, consult the user
documentation.
included for ease of access.) For detailed documentation of each of these features, consult the user
documentation.
New Hardware
TCC2P Card
The Advanced Timing, Communications, and Control Plus (TCC2P) card is an enhanced version of the
TCC2 card. The primary enhancements are Ethernet security features and 64K composite clock BITS
timing (SONET only).
TCC2 card. The primary enhancements are Ethernet security features and 64K composite clock BITS
timing (SONET only).
The TCC2P card performs system initialization, provisioning, alarm reporting, maintenance,
diagnostics, IP address detection/resolution, SONET SOH DCC/GCC termination, and system fault
detection for the ONS 15454. The TCC2P also ensures that the system maintains Stratum 3 (Telcordia
GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
diagnostics, IP address detection/resolution, SONET SOH DCC/GCC termination, and system fault
detection for the ONS 15454. The TCC2P also ensures that the system maintains Stratum 3 (Telcordia
GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
The TCC2P card requires Software Release 4.0 or later.
The LAN interface of the TCC2P card meets the standard Ethernet specifications by supporting a cable
length of 328 ft (100 m) at temperatures from 32 to 149 degrees Fahrenheit (0 to 65 degrees Celsius).
The interfaces can operate with a cable length of 32.8 ft (10 m) maximum at temperatures from –40 to
32 degrees Fahrenheit (–40 to 0 degrees Celsius).
length of 328 ft (100 m) at temperatures from 32 to 149 degrees Fahrenheit (0 to 65 degrees Celsius).
The interfaces can operate with a cable length of 32.8 ft (10 m) maximum at temperatures from –40 to
32 degrees Fahrenheit (–40 to 0 degrees Celsius).
TCC2P Functionality
The TCC2P card supports multichannel, high-level data link control (HDLC) processing for the DCC.
Up to 84 DCCs can be routed over the TCC2P card and up to 84 section DCCs can be terminated at the
TCC2P card (subject to the available optical digital communication channels). The TCC2P selects and
processes 84 DCCs to facilitate remote system management interfaces.
Up to 84 DCCs can be routed over the TCC2P card and up to 84 section DCCs can be terminated at the
TCC2P card (subject to the available optical digital communication channels). The TCC2P selects and
processes 84 DCCs to facilitate remote system management interfaces.