Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación

Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.0.252.0

OL-19342-11

Cisco Unified Wireless Network Solution Components

Note

The 7.0.252.0 release does not support the NM-AIR-WLC6 platform. The NME-AIR-WLC
platform is supported.

Support for the NM-AIR-WLC6 platform ended with the 4.2.209.0 release.

•

Catalyst 3750G Wireless LAN Controller Switches

•

Cisco 3201 Wireless Mobile Interface Cards (WMICs)

•

Cisco Aironet 1130AG, 1240AG, AP 1550, 1522, 1552S, and 1524 Mesh Access Points

•

Cisco Aironet 1100, 1130, 1140, 1200, 1230AG, 1240, 1250, AP1260, 1300, AP3500, AP 1040,
OEAP 600 Series Access Points, 1522, 1552S, 1524, 1550, 3500p, AP801, and AP802 Series
Lightweight Access Points

Note

Controller software release 5.0.148.0 or later is not compatible with Cisco Aironet 1010,
1020, 1030, and 1510 Series Access Points.

The AP801 is an integrated access point on the Cisco 800 Series Integrated Services Routers (ISRs). For
more information on the SKUs for the access points and the ISRs, refer to the following data sheets:

•

AP860:

–

http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78_46
1543.html

•

AP880:

–

http://www.cisco.com/c/en/us/products/collateral/routers/887-integrated-services-router-isr/data
_sheet_c78_459542.html

–

http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78-613
481.html

–

http://www.cisco.com/c/en/us/products/collateral/routers/880-3g-integrated-services-router-isr/d
ata_sheet_c78_498096.html

–

http://www.cisco.com/c/en/us/products/collateral/routers/880g-integrated-services-router-isr/dat
a_sheet_c78-682548.html

•

AP890:

–

http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78-519
930.html

Note

The AP802 is an integrated access point on the Next Generation Cisco 880 Series Integrated
Services Routers (ISRs).

Note

Only Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G) or
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).