Cisco Cisco ASA 5540 Adaptive Security Appliance Manual Técnica
debug acl filter
This command enables VPN filter debugging. It can be used to help troubleshooting
installations/removal of the VPN filters into the ASP Filter table. For the
installations/removal of the VPN filters into the ASP Filter table. For the
Example 1. vpn-filter
with AnyConnect or VPN Client
.
Debug output when user1 connects:
USAGE
clear asp table filter [access-list <acl-name>]
Debug output when user2 connects (after user1 and the same filter):
USAGE
clear asp table filter [access-list <acl-name>]
Debug output when user2 disconnects:
USAGE
clear asp table filter [access-list <acl-name>]
Debug output when user1 disconnects:
USAGE
clear asp table filter [access-list <acl-name>]
●
show asp table
Here is the output of show asp table filter prior to when user1 connects. Only the implicit
deny rules are installed for IPv4 and IPv6 in both in and out directions.
deny rules are installed for IPv4 and IPv6 in both in and out directions.
USAGE
clear asp table filter [access-list <acl-name>]
●