Cisco Cisco ASA 5520 Adaptive Security Appliance Manual Técnica
The information in this document is based on these software and hardware versions:
Cisco ASA 5510 Adaptive Security Appliance that runs software version 9.1(3)
●
Cisco 2900 Series Integrated Services Router (ISR) that runs Cisco IOS software version
15.3(3)M1
15.3(3)M1
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Related Products
This document can also be used with these hardware and software versions:
Cisco ASA that runs software version 8.4(1) or later
●
Cisco ISR Generation 2 (G2) that runs Cisco IOS software version 15.2(4)M or later
●
Cisco ASR 1000 Series Aggregation Services Routers that run Cisco IOS-XE software version
15.2(4)S or later
15.2(4)S or later
●
Cisco Connected Grid Routers that run software version 15.2(4)M or later
●
Configure
Network Diagram
Background Information
Configuration of an IKEv2 tunnel between an ASA and a router with the use of pre-shared keys is
straightforward. However, when you use certificate authentication, there are certain caveats to
straightforward. However, when you use certificate authentication, there are certain caveats to