Cisco Cisco Web Security Appliance S170 Guía Del Usuario
3-7
AsyncOS 8.6 for Cisco Web Security Appliances User Guide
Chapter 3 Connect the Appliance to a Cisco Cloud Web Security Proxy
Configuring the Cloud Connector
•
Step 6. Configure Network Interfaces and Wiring
Related topics
•
Step 7. Configure Routes for Management and Data Traffic
Related topics
•
Step 8. Configure Transparent Connection Settings
By default, the Cloud Connector is deployed in transparent mode. which requires a connection to a
Layer-4 switch or a version 2 WCCP router.
Layer-4 switch or a version 2 WCCP router.
Setting
Description
Ethernet Port
If you configure the M1 interface for management traffic only, you must configure
the P1 interface for data traffic. However, you can configure the P1 interface even
when the M1 interface is used for both management and data traffic.
the P1 interface for data traffic. However, you can configure the P1 interface even
when the M1 interface is used for both management and data traffic.
IP Address
The IPv4 address to use to manage the Web Security appliance.
Network Mask
The network mask to use when managing the Web Security appliance on this
network interface.
network interface.
Hostname
The hostname to use when managing the Web Security appliance on this network
interface.
interface.
Setting
Description
Default Gateway
The default gateway IPv4 address to use for the traffic through the Management
and/or Data interface.
and/or Data interface.
Name
A name used to identify the static route.
Internal Network
The IPv4 address for this route’s destination on the network.
Internal Gateway
The gateway IPv4 address for this route. A route gateway must reside on the same
subnet as the Management or Data interface on which it is configured.
subnet as the Management or Data interface on which it is configured.
Setting
Description
Layer-4 Switch
or
No Device
•
The Web Security appliance is connected to a layer 4 switch.
or
•
You will deploy the Cloud Connector in explicit forward mode.
WCCP v2 Router
The Web Security appliance is connected to a version 2 WCCP capable router.
Note: A password can contain up to seven characters and is optional.