Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación
( D R A F T L A B E L ) A L P H A D R A F T - C I S C O C O N F I D E N T I A L
6
Installing Cisco ONS 15454 OC192LR/STM64 LH 1550 Cards
78-13839-02
Installation Procedures
Note
You must use a 19 to 24 dB (20 recommended) fiber attenuator when connecting a fiber loopback
to an OC192 LR/STM64 LH 1550 card. Never connect a direct fiber loopback.
to an OC192 LR/STM64 LH 1550 card. Never connect a direct fiber loopback.
–
Connectors: SC
–
Compliance: Telcordia SONET, GR-GSY-00253, ITU-T G.707, ITU-T G.957
•
Transmitter
–
Max. Transmitter Output Power: +10 dBm
–
Min. Transmitter Output Power: +7 dBm
–
Center Wavelength: 1530 nm – 1565 nm
–
Nominal Wavelength: 1550 nm
–
Transmitter: LN (Lithium Niobate) external modulator transmitter
•
Receiver
–
Max. Receiver Level: -10 dBm
–
Min. Receiver Level: -19 dBm
–
Receiver: APD/TIA
–
Link Loss Budget: 24 dB min., with no dispersion or 22 dB optical path loss at BER = 1- exp
(-12) including dispersion
(-12) including dispersion
•
Environmental
–
Operating Temperature:
C-Temp (15454-OC192LR1550): 0 to +55 degrees Celsius
–
Operating Humidity: 5 - 95%, non-condensing
–
Power Consumption: 72.20 W, 1.50 amps, 246.52 BTU/Hr.
•
Dimensions
–
Height:12.650 in.
–
Width: 0.716 in.
–
Depth: 9.000 in.
–
Card Weight: 3.1 lbs, 1.3 kg
•
Compliance
–
ONS 15454 OC192/STM64 cards, when installed in a system, comply with these standards:
Safety: UL 1950, CSA C22.2 No. 950, EN 60950, IEC 60950
Safety: UL 1950, CSA C22.2 No. 950, EN 60950, IEC 60950
–
Eye Safety Compliance: Class I (21 CFR 1040.10 and 1040.11) and Class 1M (IEC
60825-12001-01) laser products
60825-12001-01) laser products
Installation Procedures
Use this section if you are installing the OC-192 card for the first time. After you become familiar with
ONS 15454 card installation and boot up, use this section as a reference. For information about fiber
optic cable installation, see the Cisco ONS 15454 Procedure Guide.
ONS 15454 card installation and boot up, use this section as a reference. For information about fiber
optic cable installation, see the Cisco ONS 15454 Procedure Guide.