Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía Para Resolver Problemas
Telnet Session Setup − Cisco ONS 15454
ML−Series Card
ML−Series Card
Document ID: 64154
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Initial ML−Series Card Configuration
Create the Intial ML−Series Card Configuration Through the Console Port
Create the Intial ML−Series Card Configuration Through CTC
Telnet Session
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Initial ML−Series Card Configuration
Create the Intial ML−Series Card Configuration Through the Console Port
Create the Intial ML−Series Card Configuration Through CTC
Telnet Session
Related Information
Introduction
This document describes how to establish a Telnet connection to the Multi−Layer (ML) Series cards on Cisco
ONS 15454.
ONS 15454.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454
•
Cisco ONS 15454 ML−Series Ethernet Cards
•
Cisco IOS
®
Software
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454 that runs Cisco ONS Release 4.6.0
•
ML (bundled as part of the ONS 4.6.0 release) that runs Cisco IOS Software Release 12.1(19)EO1.
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.