Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Notas de publicación
3
Release Notes for Cisco ONS 15454 SDH Release 8.5.4
OL-20571-01
Caveats
CTC
This section documents caveats for CTC in Release 8.5.4.
CSCsv14375—Shared secret key corrupt after upgrade
Longer than 16 character shared secret key gets corrupted after an upgrade from 7.20 to 8.54. To avoid
this, use radius server key less than 16 character length before upgrade or:
this, use radius server key less than 16 character length before upgrade or:
On the node with EnableNodeAsFinalAuthenticator attribute enabled, do the following as workaround:
1.
Launch CTC.
2.
Delete the corrupted secret key record in CTC (node view->Provisioning->Security->RADIUS
Server).
Server).
3.
Recreate it with an appropriate key.
This issue will be resolved in a future release.
CSCsy14945—CTC cannot manage either nodes of the same version of higher maintenance version,
than its core version
than its core version
CTC cannot manage either nodes of the same version of higher maintenance version, than its core
version. Specifically the nodes are not accessible by CTC. The workaround is to upgrade the CTC core
version or manually clean the CTC jar cache and then ensure no nodes of the specified version above are
encountered. This issue will be resolved in a future release.
version. Specifically the nodes are not accessible by CTC. The workaround is to upgrade the CTC core
version or manually clean the CTC jar cache and then ensure no nodes of the specified version above are
encountered. This issue will be resolved in a future release.
Data I/O Cards
This section documents caveats for Data I/O Cards in Release 8.5.4.
CSCsx75218—VC12 VCAT circuit members may not come-up and report LOP alarm
Create a VC4-2c, VC4-3c, VC4-4c, VC4-8c, VC4-16c, or any of the CCAT circuit and the delete the
CCAT circuit. Create VC12 VCAT circuit using the same VC4 members as previously deleted CCAT
circuits. Some VC12 VCAT circuit members may not come-up and report LOP alarm. The workaround
is to hard-reset CEMR-10 or MLMR-10 cards. This issue will be resolved in a future release.
CCAT circuit. Create VC12 VCAT circuit using the same VC4 members as previously deleted CCAT
circuits. Some VC12 VCAT circuit members may not come-up and report LOP alarm. The workaround
is to hard-reset CEMR-10 or MLMR-10 cards. This issue will be resolved in a future release.
CSCsy16814—Traffic drop is observed when port state change from OOS-DSBLD to IS
Traffic drop is observed when port state change from Locked,disabled to Unlocked. The workaround is
to perform Unlocked > Locked > Unlocked transition until problem is fixed. This issue will be resolved
in a future release.
to perform Unlocked > Locked > Unlocked transition until problem is fixed. This issue will be resolved
in a future release.
DWDM
This section documents caveats for DWDM in Release 8.5.4.