Cisco Cisco UCS B440 M1 High-Performance Blade Server Manual Técnica
Auto Upgrade Blade Firmware Revision in UCS
Environment
Environment
Document ID: 110341
Contents
Introduction
Prerequisites
Requirements
Components Used
Network Diagram
Conventions
Main Task
Create Service Profile for Autoconfig Policies
Create Autoconfig Policies
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Network Diagram
Conventions
Main Task
Create Service Profile for Autoconfig Policies
Create Autoconfig Policies
Verify
Troubleshoot
Related Information
Introduction
Cisco Unified Computing System (UCS) has the concept of an automatic policy called Autoconfiguration
Policies. This policy is applied to any new blade that is installed in the UCS system. This policy is to allow
you to upgrade blades to your desired firmware revisions automatically, which eliminates the need to worry
that new or replaced hardware will need to be upgraded or downgraded to meet organizational needs.
Policies. This policy is applied to any new blade that is installed in the UCS system. This policy is to allow
you to upgrade blades to your desired firmware revisions automatically, which eliminates the need to worry
that new or replaced hardware will need to be upgraded or downgraded to meet organizational needs.
This document illustrates how this is done by:
Creating a Service Profile
•
Creating Autoconfiguration Policies and add these Autoconfiguration Policies to the Service Profile
created
created
•
Prerequisites
Requirements
Cisco recommends that you have a working knowledge of the Cisco UCS hardware and software.
Components Used
The information in this document is based on Cisco UCS.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.
Network Diagram
A typical Cisco UCS topology looks like this: