Cisco Cisco ONS 15305 Multiservice Customer Access Platform Notas de publicación
3
Release Notes for Cisco ONS 15305 Release 3.0.6
OL-16677-01
Caveats
Operational condition for the management-port is reported "up" as a result of the design for IP
unnumbered routing. The management-port IF index is "borrowed" by point-to-point links in order to
obtain unnumbered routing support.
unnumbered routing. The management-port IF index is "borrowed" by point-to-point links in order to
obtain unnumbered routing support.
Work-around:
None.
Reproducibility:
100%
Resolution:
Not applicable.
CSCsh38125
Improper behavior when deleting MSP PG with far end Manual switch.
Symptom:
ONS15305 CTC behave improperly while deleting a MSP Protection Group whit a remote manual
switch to protection in place.
switch to protection in place.
Conditions:
MSP bidirectional Protection Group in place between an ONS15305 and a ONS15454E; Traffic is
manually switched on the protect path on the ONS15454E side, when the user try to delete the MSP
Protection Group on the ONS15305 side:
manually switched on the protect path on the ONS15454E side, when the user try to delete the MSP
Protection Group on the ONS15305 side:
•
CTC display a warning message "Protect port is Active. You might lose traffic. Really want to
continue?"
continue?"
•
On pressing "Yes", the error message "EID - 3182 - The topology element is in use and cannot be
deleted as requested" is displayed if the node is DCC connected on the protection group (as the node
is DCC connected and deleting the protection group may result in connection loss between CTC and
node)
deleted as requested" is displayed if the node is DCC connected on the protection group (as the node
is DCC connected and deleting the protection group may result in connection loss between CTC and
node)
•
Despite the error message CTC goes ahead and deletes the protection group, if the node is connected
only via DCC the connection to the node is lost.
only via DCC the connection to the node is lost.
Work-around:
Always verify that traffic is in the working patch before deleting a protection group. In case a DCC
connection is present and node connection is lost, is possible to recover the connection by issuing a
manual switch on the ONS15454E side to move back the traffic (and DCC) to the working path.
connection is present and node connection is lost, is possible to recover the connection by issuing a
manual switch on the ONS15454E side to move back the traffic (and DCC) to the working path.
Resolution:
Under investigation.
CSCsh38260
Force switch command not cleared in case of SF in protect line