Cisco Cisco ONS 15310-MA SONET Multiservice Platform Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
6
Release Notes for Cisco ONS 15310-MA Release 8.5.3
OL-17926-01
Resolved Caveats for Release 8.5.3
Path Protection
This section documents caveats for Path Protection in Release 8.5.3.
CSCsl52122—Revertive path protection circuit may not switch to protected path during activation
A revertive path protection circuit may not switch to protected path during activation when the path
protection selector does not detect the working path as Active even if that path has errors. This issue will
be resolved in a future release.
protection selector does not detect the working path as Active even if that path has errors. This issue will
be resolved in a future release.
SNMP
This section documents caveats for SNMP in Release 8.5.3.
CSCso22135—Node reboots when the snmpwalk command is executed on entPhysicalDescr,
cerentEnvMonVoltage
cerentEnvMonVoltage
The node may reboot when the snmpwalk command is executed on entPhysicalDescr,
cerentEnvMonVoltage. This issue will be resolved in a future release.
cerentEnvMonVoltage. This issue will be resolved in a future release.
TL1
This section documents caveats for TL1 in Release 8.5.3.
Note
To be compatible with TL1 and DNS, all nodes must have valid names. Node names should contain
alphanumeric characters or hyphens, but no special characters or spaces.
alphanumeric characters or hyphens, but no special characters or spaces.
CSCsu24438—RTRV-TH-MOD2 command for the optical ports does not retrieve any value
The RTRV-TH-MOD2 command for the optical ports does not retrieve any value when the MONTYPE
specified in the command is “ALL” with the FEND location, and returns the error “/* Far End
Performance Monitoring Values Not Supported */.” The workaround is to use the following commands
to retrieve the threshold values of the optical ports:
specified in the command is “ALL” with the FEND location, and returns the error “/* Far End
Performance Monitoring Values Not Supported */.” The workaround is to use the following commands
to retrieve the threshold values of the optical ports:
•
RTRV-TH-MOD2::AID:1::,FEDN;
•
RTRV-TH-ALL:::1::,FEND;
•
RTRV-TH-MOD2::AID:1::<MONTYPE>,FEND;
This issue will be resolved in a future release.
Resolved Caveats for Release 8.5.3
This section documents caveats resolved in Release 8.5.3.