Cisco Cisco WVC200 Wireless-G PTZ Internet Video Camera - Audio Notas de publicación
Sercomm Corporation
WVC200 EU Release Note
2008/07/22 V1.2.1R00
1) Fix bug: When video quality were set to high or very high and with
complex backgrounds, video clips would be
corrupted.
2) Fix bug: Video clips are corrupted.
3) Update: Release FW with extension number. The information can be
found when requesting
http://<ip>/adm/sysinfo.cgi using browser. The format will be V1.2.0R05
E01.
4) Fix bug: When the FTP server shutdown, the camera did not keep trying
to setup connections with the server.
5) Fix bug: Video clips of emails lost audio track.
6) Fix bug: authentication check was disabled after saving changes in user
list.
7) Fix bug: Video clip of Email lost some frames after event triggered.
8) Fix bug: The button of Pan/Tilt on Monitor utility will gray out when the
setting of Options is set on “Disable
Pan/Tilt while Motion Detection”.
9) Fix bug: Icons of UI disappear after upgraded F/W form V1.1.0 to
V1.2.0R03.
10) Fix bug: The “Calibration” function work abnormally.
11) Fix bug: Wording is wrong for the unit of “Delay between E-mails”.
12) Fix bug: Date/Time will be changed to incorrect value on “Basic
Setting”.
13) Fix bug: Change same language will display “File (Null) not found”.
14) Fix bug: snapshot.cgi always display 160X128 image.
(http://xxx/img/snapshot.cgi?size=<resolution>
where <resolution>=1 160X128
=2 320X240
=3 640X480
15) Allow user to change SMTP port.
16) “FTP server name” allow characters from ‘A’-‘Z’, ‘a’- ‘z’, ‘0’-‘9’,’ –‘ ,’
_ ‘ and ‘.’
17) Fixed event detection issue by adding "Enable Motion Detection in all
position" on Options page.
2008/07/22 V1.2.1R00
1) Fix bug: When video quality were set to high or very high and with
complex backgrounds, video clips would be
corrupted.
2) Fix bug: Video clips are corrupted.
3) Update: Release FW with extension number. The information can be
found when requesting
http://<ip>/adm/sysinfo.cgi using browser. The format will be V1.2.0R05
E01.
4) Fix bug: When the FTP server shutdown, the camera did not keep trying
to setup connections with the server.
5) Fix bug: Video clips of emails lost audio track.
6) Fix bug: authentication check was disabled after saving changes in user
list.
7) Fix bug: Video clip of Email lost some frames after event triggered.
8) Fix bug: The button of Pan/Tilt on Monitor utility will gray out when the
setting of Options is set on “Disable
Pan/Tilt while Motion Detection”.
9) Fix bug: Icons of UI disappear after upgraded F/W form V1.1.0 to
V1.2.0R03.
10) Fix bug: The “Calibration” function work abnormally.
11) Fix bug: Wording is wrong for the unit of “Delay between E-mails”.
12) Fix bug: Date/Time will be changed to incorrect value on “Basic
Setting”.
13) Fix bug: Change same language will display “File (Null) not found”.
14) Fix bug: snapshot.cgi always display 160X128 image.
(http://xxx/img/snapshot.cgi?size=<resolution>
where <resolution>=1 160X128
=2 320X240
=3 640X480
15) Allow user to change SMTP port.
16) “FTP server name” allow characters from ‘A’-‘Z’, ‘a’- ‘z’, ‘0’-‘9’,’ –‘ ,’
_ ‘ and ‘.’
17) Fixed event detection issue by adding "Enable Motion Detection in all
position" on Options page.