Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación
10
Installing and Operating UBIC-V EIAs in the Cisco ONS 15454
78-16140-04
Install UBIC-V EIAs
Figure 6
Installed Alignment Standoffs
Install UBIC-V EIAs
Caution
Always use an electrostatic discharge (ESD) wristband when working with a powered ONS 15454. Plug
the wristband cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
the wristband cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
You will need the following equipment to install the UBIC-V EIA:
•
#2 Phillips screwdriver
•
Small slot-head screwdriver
•
6 perimeter screws, 6-32 x 0.375-inch Phillips head (P/N 48-0422-01)
Installed alignment standoffs
120366