Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación
2
Installing and Operating UBIC-V EIAs in the Cisco ONS 15454
78-16140-04
UBIC-V EIA Description
UBIC-V EIA Description
UBIC-V EIAs are attached to the shelf assembly backplane to provide up to 112 transmit and receive
DS-1 connections through 16 SCSI connectors per side (A and B) or 96 transmit and receive DS-3
connections. The UBIC-V EIAs are designed to support DS-1, DS-3, and EC-1 signals. The appropriate
cable assembly is required depending on the type of signal.
DS-1 connections through 16 SCSI connectors per side (A and B) or 96 transmit and receive DS-3
connections. The UBIC-V EIAs are designed to support DS-1, DS-3, and EC-1 signals. The appropriate
cable assembly is required depending on the type of signal.
You can install UBIC-Vs on one or both sides of the ONS 15454. As you face the rear of the ONS 15454
shelf assembly, the right side is the A side (15454-EIA-UBICV-A) and the left side is the B side
(15454-EIA-UBICV-B). The diagrams adjacent to each row of SCSI connectors indicate the slots and
ports that correspond with each SCSI connector in that row, depending on whether you are using a high
density (HD) or low density (LD) configuration.
shelf assembly, the right side is the A side (15454-EIA-UBICV-A) and the left side is the B side
(15454-EIA-UBICV-B). The diagrams adjacent to each row of SCSI connectors indicate the slots and
ports that correspond with each SCSI connector in that row, depending on whether you are using a high
density (HD) or low density (LD) configuration.
Note
UBIC-V EIAs will support use with the high-density (48-port DS-3, 56-port DS-1, and 12-port DS3XM)
electrical cards. These cards are not available until a future release.
electrical cards. These cards are not available until a future release.
shows the A- and B-side slot assignments.