Cisco Cisco NSS324R 4-Bay Rackmount Smart Storage Referencia técnica
How to Use RADIUS on Cisco Smart Storage
© 2010 Cisco Systems, Inc. All rights reserved.
Page 2 of 14
E nable R ADIUS on Y our S mart S torage
To enable RADIUS on your Smart Storage follow these steps:
1. Choose Applications > RADIUS Server from the Navigation menu.
2. Check the Enable RADIUS Server check box to enable RADIUS server support.
A.
Check the Grant dial-in access to system user accounts check box.
3. Click Apply to save the settings.
4. Select the RADIUS CLIENTS tab to set up the authorization for an access device, such as
a router, a switch, or a wireless access point (WAP).
5. Click Create a New Client from the top right to create an authorization device.
6. Enter the Name, IP address, Prefix Length, and Secret Key information:
•
Name—Enter a generic name.
•
IP Address—Enter the IP address of the device you want
to authorize.
•
Prefix Length—Network addresses range.
•
Shared Key—Secret key for authorization. The secret key
must be at least six characters. Use this same secret key
and input at the router, switch, or WAP administration
configuration parameters for their own RADIUS options.