Cisco Cisco ONS 15305 Multiservice Customer Access Platform Guía Para Resolver Problemas
Failure to Create Circuit Between CE Card on ONS
15310 and ML Card on ONS 15454
15310 and ML Card on ONS 15454
Document ID: 69337
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background
Problem
Solution
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background
Problem
Solution
Related Information
Introduction
This document describes why the circuit creation fails between the Cisco ONS CE−Series Ethernet card on
Cisco ONS 15310−CL and the Cisco ML−Series card on Cisco ONS 15454.
Cisco ONS 15310−CL and the Cisco ML−Series card on Cisco ONS 15454.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454
•
Cisco ONS 15310
•
Cisco ONS 15454 ML−Series Ethernet Cards
•
Cisco ONS CE−Series Ethernet Card
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454 that runs Cisco ONS version 6.0
•
Cisco ONS 15310 version 6.0
•
ML (bundled as part of the ONS 6.0 release) that runs Cisco IOS® Software Release 12.2(27)SV and
later
later
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.