Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Notas de publicación
40
Release Notes for Cisco ONS 15454 Release 8.0
OL-10900-01
New Features and Functionality
CSCse21172
Channel start-up procedure is restarted if Ptarget of an already provisioned channel is increased by more
than 5 dB. This issue is resolved in Release 8.0.
than 5 dB. This issue is resolved in Release 8.0.
Data I/OCards
CSCsd63924
The RTRV-FAC TL1 command displays payload as FSTE instead of GIGE on the ML1000-2 card. This
issue is resolved in Release 8.0.
issue is resolved in Release 8.0.
Bridge and Roll
CSCsc60635
Bridge and Roll is allowed on the STM1E card, although it is not supported. This issue is resolved in
Release 8.0.
Release 8.0.
New Features and Functionality
This section highlights new features and functionality for Release 8.0. For detailed documentation of
each of these features, consult the user documentation.
each of these features, consult the user documentation.
Note
The ML-MR-10 and CE-MR-10 cards are not supported in Release 8.0. These cards are supported in
Release 8.5 onwards.
Release 8.5 onwards.
Common Hardware
Fan Tray Assembly
The 15454-CC-FTA fan tray assembly power requirements are: 115 W, 2.4 A, and 393 BTU/hr.
MSPP Hardware
15454_MRC-12 Multirate Card
The 15454_MRC-12 card existed in a previous release; however, the card now supports additional PPMs,
which adds to the card’s functionality. The PPMs and their functionality are listed below:
which adds to the card’s functionality. The PPMs and their functionality are listed below:
•
PPM = ONS-SI-155-SR-MM (OC3/STM1 Multimode).
•
PPM = ONS-SI-622-SR-MM (OC12/STM4 Multimode).