Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Notas de publicación

This section documents supplemental changes that have been added to the Release Notes for Cisco ONS 
15454 Release 7.0 since the production of the Cisco ONS 15454 System Software CD for Release 7.0.

The following changes have been added to the release notes for Release 7.0

The following caveats have been added. 

 

Review the notes listed below before deploying the ONS 15454. Caveats with tracking numbers are 
known system limitations that are scheduled to be addressed in a subsequent release. Caveats without 
tracking numbers are provided to point out procedural or situational considerations when deploying the 
product.

When the card type in CTC is changed from DS1_14 to DS1_E1_56 with DS1-14 physical card in the 
slot, the LED in DS1_14 card will show Act (Green) LED, instead of Fail (RED) LED. This issue will 
be resolved in a future release.

Rarely, the non-enhanced Muxponder unit does not pass Jitter Tolerance test from Trunk port to client 
port as per ITU-T G.825, 2 Mb/s mask, at the 10 Hz specific setpoint. The Muxponder should be 
configured with G.709 Off, FEC Off and Trunk signal provided by external Jitter test box, and the unit 
client port output monitored for errors, to see this issue. This issue will not be resolved. Note that in 
normal network configurations the muxponder is operated with G.709 and FEC turned on, and the jitter 
tolerance tests pass.