Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Notas de publicación

To be compatible with TL1 and DNS, all nodes must have valid names. Node names should contain 
alphanumeric characters or hyphens, but no special characters or spaces. 

When a TL1 session to a remote node (ENE) is established via a gateway node (GNE) and you have 
changed the node name of the ENE via either TL1, CTC or SNMP, then you must wait for about 30 
seconds to issue a TL1 command via the GNE. This delay is to permit the updates to propagate to all 
nodes in the network. During this transition, neither the old node name nor the new node name can be 
used in the TL1 session to access the ENE. This 30 second window may be reduced in a future release.

When you have never previously installed the online user manuals on your workstation (PC or UNIX) 
and you click the Help > User Manuals menu in CTC, there is no error message instructing you to install 
the online manuals. You must install the online help from the software or documentation CD prior to 
selecting it from the menu. An error message for the case in which the help is not installed will be 
provided in a future release.

This section documents caveats resolved in Release 5.0.x. Caveats resolved in DWDM Release 4.7 are 
also included.

Cisco IOS may permit arbitrary code execution after exploitation of a heap-based buffer overflow 
vulnerability. Cisco has included additional integrity checks in its software, as further described 
below, that are intended to reduce the likelihood of arbitrary code execution.

Cisco has made free software available that includes the additional integrity checks for affected 
customers.

This advisory is posted at 

.

This issue is resolved in Release 5.0.6.