Cisco Cisco Wireless Services Module 2 (WiSM2) Notas de publicación

Cisco Controller Release 7.0.116.0 has been awarded Federal Information Processing Standard (FIPS) 
140-2 validation. The following Cisco Wireless LAN Controllers and access points have received FIPS 
140-2 Level 2 validation: Cisco 5508 WLAN Controller, Cisco Wireless Integrated Services Module 
(WiSM), Cisco 4400 Series WLAN Controllers, Cisco 3750G WLAN Controller. Cisco Aironet 
Lightweight Access Points: 3502i, 3502e, 1262, 1142, 1252, 1524, 1522, 1131, and 1242. The NIST 
Security Policies and FIPS certificates for these modules can be downloaded at the NIST web site: 

The software is factory installed on your controller and automatically downloaded to the access points 
after a release upgrade and whenever an access point joins a controller. As new releases become available 
for the controllers and their access points, you should consider upgrading.

The Cisco WiSM requires software release SWISMK9-32 or later releases. The Supervisor 720 
12.2(18)SXF2 supports the Cisco WiSM software release 3.2.78.4 or later, and the Supervisor 720 
12.2(18)SXF5 (Cisco IOS Software Modularity) supports the Cisco WiSM software release 4.0.155.5 
(with Cisco IOS Software Modularity).

To use the Cisco WiSM in the Cisco 7609 and 7613 Series Routers, the routers must be running Cisco 
IOS Release 12.2(18)SXF5 or later.

The Cisco Wireless LAN Controller Network Module is supported on Cisco 28/37/38xx Series 
Integrated Services Routers running Cisco IOS Release 12.4(11)T2, 12.4(11)T3, and 12.5.

To use the controller in the Catalyst 3750G Wireless LAN Controller Switch, the switch must be running 
Cisco IOS Release 12.2(25)FZ, 12.2(35)SE or later, 12.2(37)SE or later, 12.2(44)SE or later, or 
12.2(46)SE or later. The following Cisco IOS Releases and any variants are not supported: 12.2(25)SEC, 
12.2(25)SED, 12.2(25)SEE, 12.2(25)SEF, and 12.2(25)SEG. All Catalyst 3750 software feature sets (IP 
Base, IP Service, and Advanced IP Services) are supported for use with the controller.

You can use the 2112 and 2125 controllers only with software release 5.1.151.0 or later.

To find the software release running on your controller, click Monitor and look at the Software Version 
field under Controller Summary on the controller GUI, or enter show sysinfo on the controller CLI.