Cisco Cisco ONS 15310-MA SONET Multiservice Platform Guía De Instalación

This procedure assumes you are upgrading using Release 6.x TL1 syntax. TL1 commands issued prior 
to software activation to Software R9.1 varies in syntax depending on the release you are actually 
upgrading from. To ensure that your syntax for each command is correct, use the TL1 syntax supplied 
in the Cisco ONS SONET TL1 Command Guide for your particular release when issuing the following 
commands:

ACT-USER

COPY-RFILE

REPT EVT FXFR

OPR-PROTNSW-<OCN_TYPE>

RTRV-COND-ALL

RTRV-ALM-ALL

To perform an R9.1 software download using TL1, you must first have an FTP server or a terminal 
emulation program like HyperTerminal running on your workstation. The download (COPY-RFILE) 
command is different when downloading software to a gateway network element (GNE) or an end 
network element (ENE) under the following conditions:

FTP is being used.

Server is set up with a login and password of FTPUSER1 and FTPUSERPASSWORD1.

FTP server has an IP address of 10.1.1.1. 

FTP server is running on the standard FTP port.

Software package is called “15310-03xx-A04K-1405.pkg”.

The GNE and ENE commands are as follows:

When downloading software to a GNE, use the following command:

COPY-RFILE:NODENAME:RFILE-PKG:CTAG::TYPE=SWDL, 

SRC=“ftp://FTPUSER1:FTPUSERPASSWORD1@10.1.1.1/15310-03xx-A04K-1405.pkg”;

When downloading software to an ENE, use the following command:

COPY-RFILE:NODENAME:RFILE-PKG:CTAG::TYPE=SWDL,

This procedure upgrades the software to Software R9.1 using TL1 rather 
than CTC.

PC or UNIX workstation

NTP-U434 Preparation for Upgrading to Release 9.1, page 3
NTP-U435 Back Up the ONS 15310-MA Software Database, page 4

Optional

Onsite or remote (but in the presence of the workstation)

Superuser