Cisco Cisco VC220 Dome Network Camera Manual De Mantenimiento
4
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
26
Installing the Cisco VC 220 Network Camera
Software
Software
Before You Begin
There are two ways of installing your Cisco VC 220 camera. You can use the Cisco
Video Monitoring System, or you can use the Cisco VC 220 product CD. The
product CD includes a Setup Wizard software program. Before using either
method of installation, consider the following recommendations.
Video Monitoring System, or you can use the Cisco VC 220 product CD. The
product CD includes a Setup Wizard software program. Before using either
method of installation, consider the following recommendations.
General Recommendations
•
Read through this guide and other supporting materials to familiarize
yourself with the camera before continuing.
yourself with the camera before continuing.
•
Internet Explorer may prompt you to accept ActiveX to view video; follow
the instructions to accept ActiveX.
the instructions to accept ActiveX.
Security Recommendations
•
The default username and password is admin. For security purposes, it is
highly recommended that you change the default name and password
using the camera’s web-based configuration utility at a later time.
highly recommended that you change the default name and password
using the camera’s web-based configuration utility at a later time.
•
To secure your camera from possible intrusion, it should be located behind
a router or appropriate firewall in your LAN.
a router or appropriate firewall in your LAN.
•
Use the IP filtering feature to control which IP addresses can access your
cameras. See
cameras. See
for more
information.