Cisco Cisco Unified MeetingPlace Audio Server Guía De Instalación
Cisco MeetingServer 5.1 Installation Planning Guide
56
Cisco Systems
March 2003
Worksheet 3-3a MeetingPlace LAN Requirements (U.S.,
Canada, Japan)
Action
Description
9
9
9
9
1.
Cable/Connector
Requirements
Requirements
Connection from MeetingPlace Server to your network:
For twisted-pair Ethernet, 100Base-TX. Provide an RJ-
45 connector. 10BaseT will work, but is not
recommended. This cable is customer supplied.
45 connector. 10BaseT will work, but is not
recommended. This cable is customer supplied.
Connection from MeetingPlace IP Access Blade to your
network:
network:
For twisted-pair Ethernet, 100Base-TX. Provide an R
J-45 connector. This cable is Latitude supplied.
J-45 connector. This cable is Latitude supplied.
Latitude provides a 7.5-meter CAT-5e cable with Ferrite
snap-on bead (#3300-0029-02) on one end. If the cable
is changed, the snap-on bead must be moved.
snap-on bead (#3300-0029-02) on one end. If the cable
is changed, the snap-on bead must be moved.
Note: Set your switch to auto-negotiate. If your switch does
not support auto-negotiation, it is recommended that it be set
to 100 BaseT Full Duplex.
not support auto-negotiation, it is recommended that it be set
to 100 BaseT Full Duplex.
2.
Desktop
Requirements
Requirements
Provide a desktop system connected to your LAN with the
following minimum configuration:
following minimum configuration:
133 MHz or higher Pentium (for Windows 2000)
Windows 98, NT 4.0 or later, or 2000
15MB available disk space
16MB RAM (24MB RAM for Windows NT or 256MB
RAM for Windows 2000)
RAM for Windows 2000)
Network Interface Card
3.
Host Name
Name for MeetingPlace on your network
4.
MeetingPlace
IP Address
IP Address
Address of the MeetingPlace host on the network
Note: When you request your IP address and hostname,
ensure your LAN Manager adds this to the name server(s).
ensure your LAN Manager adds this to the name server(s).
5.
Subnet Mask
Mask that completes the address for the MeetingPlace host
6.
Broadcast Address
Address used to broadcast packets on the local LAN segment
7.
Default Gateway
Address of the gateway that will accept and route
information to the other networks
information to the other networks
8.
SNMP
IP Address
IP Address
IP address for which traps will be sent for trap communities
9.
Name Server
Ensure all workstations running MeetingTime utilize a name
server (DNS/WINS or local “hosts” table)
server (DNS/WINS or local “hosts” table)