Cisco Cisco Unified MeetingPlace Audio Server Manual De Mantenimiento
A-66
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Appendix A CLI Reference
update
update
Summary
The “update” command runs a software update and supports patch application.
Description
The “update” command is used to start a software update procedure. After prompting the user to enter
the location of the update file, the “update” command automatically extracts all the files and installs the
update or patch.
the location of the update file, the “update” command automatically extracts all the files and installs the
update or patch.
After typing
update
and pressing Enter, you see a menu asking where the update file is located. You are
shown the following options:
1) CD — prompts the user to enter a CD into the CD-ROM drive.
2) Diskette — prompts the user to enter a diskette into the floppy disk drive.
3) Remote File — prompts the user to enter whether the remote file is FTP or gateway SIM. Type
f
and press Enter for FTP (the default) or type
g
and press Enter for gateway SIM.
The gateway SIM method requires an operational gateway SIM agent on the remote system where
the patch resides, and an operational SIM on the MeetingPlace server. This means the server must
be up during the distribution step if the gateway SIM method is to be used. Gateway SIM version
4.2 and above will support this feature. Gateway SIM is much slower than FTP.
the patch resides, and an operational SIM on the MeetingPlace server. This means the server must
be up during the distribution step if the gateway SIM method is to be used. Gateway SIM version
4.2 and above will support this feature. Gateway SIM is much slower than FTP.
If you are going to use FTP or gateway SIM to apply the update, obtain the necessary information
before you start the update.
before you start the update.
Table A-2
Information Needed for Applying Patch via FTP Distribution
Description
Value
Obtain information about
FTP server
FTP server
IP Address or name of FTP server
IP Address ______________
Or Name ______________
Or Name ______________
User ID on FTP server
User ID ________________
Password for the User ID
Password _______________
Path to the patch file and
patch file name on FTP
server
patch file name on FTP
server
If you place a file in the default ftp
directory for the specify user ID, then all
you need to specify is the filename, if not
you need to specify the path plus the file
name. For example:
R5.2/Path/update.tar.gz
directory for the specify user ID, then all
you need to specify is the filename, if not
you need to specify the path plus the file
name. For example:
R5.2/Path/update.tar.gz
Path/name
_______________________
_______________________
_______________________
_______________________