Cisco Cisco Unified MeetingPlace Audio Server Manual De Mantenimiento

3-10

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)

OL-

Chapter 3 Installing the 8112 Server

Unpacking the 8112 server

Worksheets

Configuration worksheets are supplied in the MeetingPlace Audio Server 5.2 Installation Planning
Guide to ensure that the MeetingPlace configuration integrates within the customer’s environment. Make
sure the necessary worksheets are completed before proceeding with the installation.

Unpacking the 8112 server

T1 CAS and pure IP systems are shipped in two boxes. One box contains the server and server
accessories. The other box contains the modem and external cables.

T1 PRI and E1 systems are also shipped in two boxes. One box contains the server and server
accessories. The other box contains the breakout box and cables, modem, and external cables.

To unpack the 8112 server, follow these steps:

•

remove the shipping material

•

inspect for damage

•

verify the contents of the boxes

Removing the shipping material

Warning

The server, its peripheries, and the packing materials can weigh up to 130 lbs (59 kg).

Step 1

Make sure the packing carton is upright as in

Figure 3-4

Table 3-7

LAN Cable Requirements

Type of LAN Cable

LAN Requirements

CPU to LAN cable

(customer-supplied)

For twisted-pair Ethernet, 100Base-TX. Provide
an RJ-45 jack.

Note

10BaseT works, but is not recommended.

Multi Access Blade to LAN
cable (for IP ports only)

(Cisco Systems-supplied)

For twisted-pair Ethernet, Cat5e. Provide an
RJ-45 connector. Cisco Systems provides a
25-foot (7.6 m) shielded cable with ferrite.

Australia

Cisco Systems does not supply any LAN cables
with servers shipped to Australia.