Cisco Cisco Unified MeetingPlace Audio Server Manual De Mantenimiento
4-23
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-27 net Command Change Network Time Protocol Servers
Step 7
Type
99
and press Enter to quit modifying.
Step 8
Type
y
and press Enter to commit to the changes you made.
Step 9
Type
1
and press Enter from the “net” command menu to view and confirm the new configuration. See
Select: 7
The IP addresses for up to three Network Time Protocol servers
may be entered.
To clear an entry, use the address “0.0.0.0”.
NTP server #1 [198.207.208.114]: 198.207.208.114
NTP server #2 [198.207.208.84]: 198.207.208.84
NTP server #3 [0.0.0.0]: 0.0.0.0
1) View the current configuration
2) Select a different site for this server
3) Change the host and site names
4) Change server IP address and Ethernet address
5) Change site subnet mask or broadcast addr
6) Change site routing information
7) Change network time protocol servers
99) Return to the main menu