Cisco Cisco D9824 Advanced Multi Decryption Receiver Guía De Instalación
Setting up Input Information
173
d
Click OK. The selected backup is enabled.
e
In the Search Path table, click the field to edit an enabled Backup 1, 2, or 3. The
following is an example of editing the enabled Backup 1 channel for PE1:
following is an example of editing the enabled Backup 1 channel for PE1:
f
Enter a channel number and click Save. Enter 0 to clear the backup channel.
Note: We recommend that you configure a minimum of one backup transport. If no
backup transports are configured, the origin channel is used.
backup transports are configured, the origin channel is used.
The configured backup is enabled. To disable a backup, click the Backup 1,
Backup 2, or Backup 3 radio button and click Disable.
Backup 2, or Backup 3 radio button and click Disable.
8 Click Apply.
If a disaster recovery is in progress, a message is displayed, recommending that
you do not apply the setup changes during a disaster recovery.
you do not apply the setup changes during a disaster recovery.
Click Close. If you want to save your changes during a disaster recovery, click
Apply again. The warning message is displayed again. Click OK to confirm your
changes. The changes are saved.
Apply again. The warning message is displayed again. Click OK to confirm your
changes. The changes are saved.