Cisco Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE Manual De Mantenimiento
Status and Statistics
Traffic Statistics
Cisco WAP150 and WAP361 Administration Guide
24
2
-
State—The current state (active or inactive). The state indicates whether
the VAP is exchanging data with a client.
the VAP is exchanging data with a client.
You can click Refresh to refresh the screen and show the most current information.
Traffic Statistics
The Traffic Statistics page shows the real-time transmit and receive statistics for
the Ethernet interface, the Virtual Access Points (VAPs), and all WDS interfaces. All
transmit and receive statistics reflect the totals since the WAP device was last
started. If you reboot the WAP device, these figures indicate the transmit and
receive totals since the reboot.
the Ethernet interface, the Virtual Access Points (VAPs), and all WDS interfaces. All
transmit and receive statistics reflect the totals since the WAP device was last
started. If you reboot the WAP device, these figures indicate the transmit and
receive totals since the reboot.
To view traffic statistics, select Status and Statistics > Traffic Statistics.
The following information is displayed:
•
Interface—Name of the Ethernet interface, each VAP interface, and each
WDS interface. The name for each VAP interface is followed by its SSID in
parentheses.
WDS interface. The name for each VAP interface is followed by its SSID in
parentheses.
•
Total Packets—The total number of packets sent (in Transmit table) or
received (in Received table) by the WAP device.
received (in Received table) by the WAP device.
•
Total Bytes—The total number of bytes sent (in Transmit table) or received
(in Received table) by the WAP device.
(in Received table) by the WAP device.
•
Total Dropped Packets—The total number of dropped packets sent (in
Transmit table) or received (in Received table) by the WAP device.
Transmit table) or received (in Received table) by the WAP device.
•
Total Dropped Bytes—The total number of dropped bytes sent (in Transmit
table) or received (in Received table) by the WAP device.
table) or received (in Received table) by the WAP device.
•
Errors—The total number of errors related to sending and receiving data on
the WAP device.
the WAP device.
You can click Refresh to refresh the screen and show the most current information.