Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
show alcap
show alcap-service full ▀
Cisco ASR 5x00 Statistics and Counters Reference ▄
2749
show alcap-service full
Table 186. show alcap-service full Command Output Descriptions
Field
Description
alcap service
The name of the ALCAP service of which statistics are displayed.
service id
The identity number of the ALCAP service of which statistics are displayed.
Context
Indicates the system context name in which ALCAP service is configured.
state
Indicates the state of the ALCAP service.
self point code
Indicates the address of this ALCAP service in SS7 point code notation.
ss7 routing domain id
Indicates the routing domain id in which ALCAP service is associated.
AAL2 Nodes
This group displays the information related to AAL2 node configured in ALCAP service.
Node name
Indicates the name of the AAL2 node configured in ALCAP service.
Point Code
Indicates the address of AAL2 node in SS7 point code notation.
Path id
Indicates the identity number of AAL2 path configured on this AAL2 node under ALCAP service.
Routes
This group displays the information related to AAL2 routes configured for AAL2 path.
AESA
Specifies the ATM Endpoint Service Address (AESA) in an ATM (or AAL2) network to map with
adjacent AAL2 node. The AESA is based on the generic network service access point (NSAP) format.
The ATM connection from HNB-GW terminates at this point.
adjacent AAL2 node. The AESA is based on the generic network service access point (NSAP) format.
The ATM connection from HNB-GW terminates at this point.
Node id
Indicates the AAL2 node identity number used for routes in AAL2 path FSM.
ERQ timer
Indicates the maximum time, in seconds, configured for Timer_ERQ on the system to wait for
response from adjacent AAL2 node before reporting the failure of AAL2 Establish Request procedure.
Configurable range is from 5 through 30 seconds and default is 5 seconds.
response from adjacent AAL2 node before reporting the failure of AAL2 Establish Request procedure.
Configurable range is from 5 through 30 seconds and default is 5 seconds.
REL timer
Indicates the maximum time, in seconds, configured for Timer_REL on the system to waits for
response from adjacent AAL2 node before reporting the failure of AAL2 Release Request procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
response from adjacent AAL2 node before reporting the failure of AAL2 Release Request procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
RES timer
Indicates the maximum time, in seconds, configured for Timer_RES on the system to waits for
response from adjacent AAL2 node before reporting the failure of AAL2 Reset Request procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
response from adjacent AAL2 node before reporting the failure of AAL2 Reset Request procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
BLO timer
Indicates the maximum time, in seconds, configured for Timer_BLO on the system to waits for
response from adjacent AAL2 node before reporting the failure of AAL2 Path Block procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
response from adjacent AAL2 node before reporting the failure of AAL2 Path Block procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
UBL timer
Indicates the maximum time, in seconds, configured for Timer_UBL on the system to waits for
response from adjacent AAL2 node before reporting the failure of AAL2 Path Un-Block procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.
response from adjacent AAL2 node before reporting the failure of AAL2 Path Un-Block procedure.
Configurable range is from 2 through 60 seconds and default is 2 seconds.