Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
System Element Configuration Procedures
▀ Creating and Configuring ATM Interfaces and Ports
▄ Cisco ASR 5000 Series System Administration Guide
OL-22970-01
Configuring an ATM Port for an SS7 Link
Use the following example to configure an ATM port to use with an SS7 link:
Notes:
The PVC for the SS7 link has been created but can not be bound unless the SS7 routing domain configuration
has already been completed (see the SGSN Administration Guide).
Complete optional ATM port configuration (see the ATM Port Configuration Mode in the Command Line
Interface Reference) and the other steps in this procedure to set timing and save the configuration.
Binding an SS7 Link to an ATM Port
Use the following example to bind an already configured SS7 link to a PVC interface for an ATM port:
Notes:
Save the configuration as described in the Saving Your Configuration chapter.
Verifying Port and Interface Configuration
Step 1
Verify that your interface configuration settings are correct by entering the following commands: