Cisco Cisco Email Security Appliance C690 Guía Del Usuario
8-17
Cisco IronPort AsyncOS 7.5 for Email Daily Management Guide
OL-25138-01
Chapter 8 Common Administrative Tasks
Support Commands
Figure 8-8
The Feature Key Settings Page
Figure 8-9
The Feature Keys Page
To add a new feature key manually, paste or type the key into the Feature Key field
and click Submit Key. An error message is displayed if the feature is not added
(if the key is incorrect, etc.), otherwise the feature key is added to the display.
and click Submit Key. An error message is displayed if the feature is not added
(if the key is incorrect, etc.), otherwise the feature key is added to the display.
To activate a new feature key from the Pending Activation list, select the key
(mark the “Select” checkbox) and click Activate Selected Keys.
(mark the “Select” checkbox) and click Activate Selected Keys.
You can configure your Cisco IronPort appliance to automatically download and
install new keys as they are issued. In this case, the Pending Activation list will
always be empty. You can tell AsyncOS to look for new keys at any time by
clicking the Check for New Keys button, even if you have disabled the automatic
checking via the Feature Key Settings page.
install new keys as they are issued. In this case, the Pending Activation list will
always be empty. You can tell AsyncOS to look for new keys at any time by
clicking the Check for New Keys button, even if you have disabled the automatic
checking via the Feature Key Settings page.
Expired Feature Keys
If the feature key for the feature you are trying to access (via the GUI) has expired,
please contact your Cisco IronPort representative or support organization.
please contact your Cisco IronPort representative or support organization.