Cisco Cisco 5520 Wireless Controller Manual Técnica
Components Used
The information in this document is based on these software and hardware versions:
Cisco 5508 WLC that runs firmware release 7.0.220.0
•
Cisco 3502 Series LAP
•
Microsoft Windows 7 Native Supplicant with Intel 6300−N Driver version 14.3
•
Cisco Secure ACS that runs version 5.2
•
Cisco 3560 Series Switch
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Configure
In this section, you are presented with the information to configure the features described in this document.
Note: Use the Command Lookup Tool (registered customers only) to obtain more information on the
commands used in this section.
commands used in this section.
Network Diagram
This document uses this network setup: