Cisco Cisco Firepower 4110 Security Appliance

Descargar
Página de 281
Table 6:  Device Properties: Event Notification Parameters
 
 
Parameters
 
Description
 
Register This APSolute 
Vision Server for Device 
Events 
Specifies whether the APSolute Vision server configures itself as a target of the 
device events. 
Values: 
• 
Enabled—The APSolute Vision server configures itself as a target of  the 
device events (for example, traps, alerts, IRP messages, and  packet-reporting 
data). 
• 
Disabled—For a new device, the APSolute Vision server adds the  device 
without registering itself as a target for events. 
For an existing device
, the APSolute Vision server removes itself as a  target of 
the device events. 
Default: Enabled 
Note: 
APSolute Vision runs this action each time you click Submit in  the dialog 
box. 
Register APSolute Vision 
Server IP 
(This parameter is  available 
only when the  Register 
This APSolute  Vision 
Server for  Device Events 
checkbox is selected.) 
The port and IP address of the APSolute Vision server to which the 
managed device sends events. 
Remove All Other Targets of 
Device Events 
(This parameter is  available 
only when the  Register 
This APSolute  Vision 
Server for  Device Events 
checkbox is selected.) 
Specifies whether the APSolute Vision server removes from the device  all 
recipients of device events (for example, traps and IRP messages) except for its 
own address. 
Default: Disabled 
Note: 
APSolute Vision runs this action each time you click Submit in  the dialog 
box. For example, if you select the checkbox and click  Submit— and later, a 
trap target is added to the trap target-address table—APSolute Vision removes 
the additional address the next time  you click Submit in the dialog box. For 
more information, see 
APSolute Vision Server Registered for Device Events —
DefensePro,  page 55
 
 
 
To edit device connection information
 
1.
  In the device pane Sites and Clusters tree, select the device name. 
2.
  Click the 
  (Edit) button. 
3.
  Modify the parameters described in the procedure 
To add a new DefensePro device, page 51
,  and click 
Submit.
 
 
 
 
 
 
 
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 55 of 281