Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
37
7. Log Out of TL1
When you have finished using TL1, you must log out of the session. Logging out of TL1 only has to
be done once per session.
be done once per session.
Step 1
If you logged into TL1 via Cisco Transport Controller (CTC), you must log out by pressing
the Disconnect button or by issuing the CANC-USER command as shown in the following
steps.
the Disconnect button or by issuing the CANC-USER command as shown in the following
steps.
If you logged into TL1 via Telnet or craft interface, you must log out by issuing the
CANC-USER command.
CANC-USER command.
Input Format:
CANC-USER:[<TID>]:<USERID>:<CTAG>;
•
TID is the name of the node you want to access. If you only want to query the node you
connected to, leave the TID blank.
connected to, leave the TID blank.
•
USERID is the user ID. Maximum 10 alphanumeric characters.
•
CTAG is any non-blank character series that does not have to be unique.
Input Example:
CANC-USER:PETALUMA:DXT:100;
Step 2
Confirm you receive a COMPLD response to indicate the command was completed
successfully.
successfully.
Response Example:
TID001 03-07-22 02:45:12
M 100 COMPLD;