Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
10
8
Log Into TL1
Once you have connected to TL1, you must log into TL1 in order to issue commands. Logging into
TL1 only has to be done once per session.
TL1 only has to be done once per session.
Step 1
Issue the ACT-USER command:
Input Format:
ACT-USER:[<TID>]:<UID>:<CTAG>::<PID>;
•
TID is the name of the node you want to access. If you only want to query the node you
connected to leave the TID blank
connected to leave the TID blank
•
UID is your user ID
•
CTAG is any non-blank character series that does not have to be unique
•
PID is your password
Input Example:
ACT-USER::CISCO15:1234::MYPASSWD;
Step 2
Confirm you receive a COMPLD response to indicate the command was completed
successfully.
successfully.
Response Example:
TID001 03-07-22 02:45:12
M 1234 COMPLD
;