Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP) Guía De Instalación

Executing an upgrade with a single TSC card is traffic affecting. Do not start an upgrade unless both 
TSC cards are present and alarm free.

To upgrade the software successfully, read and perform each task that applies to your network in the 
proper order. 

The UPGRADE, SFTWDOWN, and SW-VER alarms are raised during the upgrade process. These 
alarms are normal and will clear when the download is complete.

Insert the Software R9.0 CD into the workstation CD-ROM (or otherwise acquire access to the software) 
to begin the upgrade process.

Inserting the software CD activates the CTC Setup Wizard. You can use the setup wizard to install 
components or click the Cancel button to continue with the upgrade.

Log into the node that you want to upgrade. For detailed instructions, refer to the Cisco ONS 15600 
Procedure Guide. If you are already logged in, continue with Step 3.

(BLSR nodes only) Complete the 

.

List all protection groups in the system; do a print screen from 
the Protection Group window.

List alarms; do a print screen from the Alarm window.

List circuits; do a print screen from the Circuit window.

This procedure upgrades your software to Software R9.0.

PC or UNIX workstation; Cisco ONS 15600 Software R9.0 (CD or soft 
copy)

(BLSR nodes only) The database must be backed up prior to locking the 
BLSR.

Required

Onsite or remote (but in the presence of the workstation)

Superuser